Table of Contents
Advertisement
Playing Audio via BT Connection
1.
Turn on the soundbar and then press the Input button on soundbar or remote
control to switch to BT mode. The display will illuminate and
2.
Enter the Bluetooth settings on your device and select Kogan 5.1 Soundbar .
3.
When successfully paired,
the display.
4.
To connect to other devices, repeat the above pairing steps.
Notes:
• If the paired device is switched off or manually disconnected, the soundbar will
automatically enter pairing mode.
• If the connected device is switched off or manually disconnected, the soundbar
will automatically enter pairing mode. The device and the soundbar will
automatically pair again when the device re-enters the connection range (10
meters).
Playing Audio via USB
The soundbar automatically switches to USB mode and
when a USB flash drive is inserted. This mode isn't selectable on the soundbar or remote
control unless a USB flash drive is connected.
1.
Ensure that your USB flash drive contains MP3, WMA, FLAC, or WAV audio files
(other file types are not supported).
2.
Connect the USB flash drive to the USB port on the soundbar (or your own USB
extension cable connected to the USB port). Audio will automatically play.
20
Bluetooth
device
MP3
will illuminate solidly on
illuminates on the display
Advertisement
Table of Contents
