Kogan KASDA512AJA User Manual page 26

The volume
decreases when the
soundbar is turned on.
Noise is heard.
The soundbar cannot
be operated using the
remote control.
The TV cannot be
operated using the
A device cannot
connect to the
soundbar or the
soundbar cannot be
connected to a
Bluetooth device.
26
The automatic volume
adjustment function is
activated. To prevent
excessive loudness, the
soundbar automatically
controls its volume within a
certain level when the
soundbar is turned on.
The soundbar is too close
to another digital or high-
frequency device.
The soundbar is out of the
operating range.
The batteries are weak.
The remote-control sensor
of the soundbar is exposed
to direct sunlight or strong
lighting.
The soundbar is blocking
-control
sensor.
The Bluetooth function of
the device is not activated,
not paired or connected
correctly.
Bluetooth is not selected as
the input source.
The soundbar is connected
to a different Bluetooth
device.
Turn up the volume as required.
Move those devices away from
the sound bar.
Use the remote control within
the operating range.
Replace with new batteries.
Adjust the lighting angle or
reposition the soundbar. The
soundbar cannot be used in
sunlight.
Position the soundbar so that it
remote-control sensor.
• Restart the soundbar and try
pairing again.
• You have not enabled the
Bluetooth function of the
device; see the user guide of
the device on how to enable
the function and correctly
connect the device.
• The sound bar is already
connected with another
Bluetooth device. Disconnect
the connected device and try
again.
Select Bluetooth as the Input
source.
Un-pair the Bluetooth device
that is currently connected and
pair with the desired Bluetooth
device.