Page 2
Heat: Keep the device away from heat sources such as radiators, heaters, stoves or other • appliances that generate heat. Damage requiring service: The appliance should be serviced by the Kogan customer • support technicians when: 1) The power-supply cord or the plug has been damaged; or 2) Objects or liquids have fallen into the device;...
Page 3
Connected AUX single, Optical and Coaxial signal on the rear panel of the Sound Bar. The LED display will display “- -” to show it is in standby mode. AUX audio signal input Adjust Equaliser mode Optical audio signal input Normal sound effect Coaxial signal input Music sound effect...
Page 4
To use the wireless subwoofer, you must ensure that the soundbar itself has been powered up and is ready for pairing. To do this, simply turn the soundbar on, then switch the subwoofer on 30 seconds later. If you turn the subwoofer on before the soundbar has booted up, the units will not pair and you will not get any sound from the subwoofer.