Table of Contents
Advertisement
Pair the Soundbar with the Rear Speakers
1.
Press the Power button to turn on the soundbar. Then, press the Input button on
the soundbar to switch to Bluetooth (BT) mode.
2.
Power on the rear speakers. The Pairing indicator on the rear speaker will slowly
flash blue to indicate it is in pairing mode.
3.
Press and hold the Switch on the bottom of the rear speaker for 2.5 seconds. The
Pairing indicator will flash quickly.
4.
After about 20-30 seconds, the Pairing indicator will turn solid and the soundbar
and rear speakers will be paired successfully.
5.
The soundbar and rear speakers will pair automatically after the initial successful
pairing, even if they are switched off and on.
6.
To pair your rear speakers with another soundbar, repeat steps 1-4. Ensure that the
soundbar you want to pair with and the rear speakers are within range, turned on
and any other pairing devices are switched off or on standby.
Notes:
• If the wireless surround speaker is turned on, but the sound bar is in standby
mode or turned off (no power), the Pairing indicator on the rear speaker will turn
solid red and stay on after about 3 minutes.
• To avoid wireless signal interference when the soundbar and rear speakers are in
use, keep the soundbar and rear speakers away from other wireless devices.
• The maximum connection distance between the sound bar and rear speakers is
10m of open space.
• Add the subwoofer connector to the sub-out port on the soundbar.
19
Advertisement
Table of Contents
