Advertisement
Recording with
tape sync
Confirming voice
edits
In the above system; a sequencer is recording in synchronization with
the MT1X multi-track recorder.
A FSK sync signal recorded on track 1
of the MT1X is converted into MIDI Tempo messages which control
the sequencer tempo. By using the MCS2 to merge data from the DX7
synthesizer with tempo
data from the YMC10,
you can overdub
a
sequence while playing back in sync with the tape. Connect the output
of the YMC10 to MCS2 MID! IN 1 so that System Messages will get
through. (Timing Clock, Start Continue and Stop are MIDI System
Messages. See the MIDI format table on p.29)
Set the QX21 to External Clock.
RY ee
Advertisement
