Advertisement
PRE20
PRE21
PRE22
PRE23
PRE24
— NOTE:
When
a switch type controller has been assigned to a Preset
Parameter with an on/off action (PRE12, 13, 14, 18), a bar will
appear in the LCD to indicate an ON condition.
If a switch type controller is turned on (causing the indicator bar
to appear) and then re-assigned, the indicator bar will remain on.
System Reset:
When the switch is pressed,
a System Reset message is sent
(MIDI System message).
Channel Inc:
This does NOT produce a MID!
message.
Each time the
switch is pressed, the transmission
channel
of the MCS2
moves up by one.
Channel Dec:
Ç
This does NOT
produce a MIDI
message.
Each time the
switch is pressed, the transmission
channel
of the MCS2
moves down by one.
Program Inc:
When the switch is pressed, the current program is incre-
mented by one and a Program Change message is sent. When
the program number gets to 88, pressing the switch will have
no more effect.
Program Dec:
When the switch is pressed, the current program is decre-
mented by one and a Program Change message is sent. When
the program number gets to 11, pressing the switch will have
no more effect.
INDICATOR
BAR
-14-
Advertisement
