Download  Print this page

Advertisement

GUITAR EFFECTS PROCESSOR
EFFECT LIST
1

Advertisement

   Related Manuals for Yamaha Magicstomp

   Summary of Contents for Yamaha Magicstomp

  • Page 1 GUITAR EFFECTS PROCESSOR EFFECT LIST...
  • Page 2: Effect Type List

    Effect Type List EFFECT TYPE Description Advanced distortion. Mainly used for direct connection to guitar amp’s front Distortion input. Digital Distortion Distortion effect. Mainly used for direct connection to guitar amp’s front input. DG Series amp sound. Mainly used for direct connection to power amp. Speaker Amp Simulator simulator allows direct recording.
  • Page 3 EFFECT TYPE Description 3 Band Parametric EQ 3-band parametric equalizer. Multi Filter 3-band multi-filter (24 dB/octave). Reverb+Chorus Reverb and chorus effects in parallel. Reverb->Chorus Reverb and chorus effects in series. Reverb+Flange Reverb and flanger effects in parallel. Reverb->Flange Reverb and flanger effects in series. Reverb+Symphonic Reverb and symphonic effects in parallel.
  • Page 4: Effect Parameters

    Effect Parameters Distortion Advanced distortion. Mainly used for direct connection to guitar amp’s front input. Parameter Display Range Description Lead1, Lead2, Drive1, Drive2, Crunch1, Crunch2, Fuzz1, Type TYPE Fuzz2, Distortion1, Distortion2, Distortion type Overdrive1, Overdrive2, Tube, Solidstate Gain GAIN 0.0 to 10.0 Adjusts the amount of distortion Master MSTR...
  • Page 5: Amp Simulator

    Presence 0.0 to 10.0 Adjusts level of extremely high frequencies Off, American 412, British 412, Modern 412, YAMAHA 412, Hybrid 412, American 212, British 212, When using a line connection to connect directly to a mixer, this can be Speaker...
  • Page 6 Flange Flange effect. Parameter Display Range Description Wave WAVE Sine, Triangle Modulation waveform Freq. FREQ 0.05 to 40.00 Hz Modulation speed Depth 0 to 100% Modulation depth Feedback gain (plus values for normal-phase feedback, minus values for FB. Gain –99 to +99% reverse-phase feedback) Mod.
  • Page 7 Stereo Vintage Phaser Stereo phaser produced by utilizing VCM (Virtual Circuitry Modeling) technology. Parameter Display Range Description Stage STAG 4, 6, 8, 10 Number of phase shift stages Mode MODE 1, 2 Phaser type Speed 0.0 to 10.0 Modulation speed Depth DPTH 0.0 to 10.0...
  • Page 8: Ring Mod

    Ring Mod. Ring modulator. Parameter Display Range Description Source OSC, SELF Modulation source: oscillator or input signal OSC Freq. 0.0 to 5000.0 Hz Oscillator frequency FM Freq. FM.F 0.05 to 40.00 Hz Oscillator frequency modulation speed FM Depth FM.D 0 to 100% Oscillator frequency modulation depth 0 to 100% Mix level...
  • Page 9 M.Band Dyna. 3-band dynamics processor, with individual solo and gain reduction metering for each band. Parameter Display Range Description Slope SLOP –6, –12 dB Filter slope Low Gain LO.G –96.0 to +12.0 dB Low band level Mid Gain MI.G –96.0 to +12.0 dB Mid band level High Gain HI.G...
  • Page 10: Dyna. Phaser

    Dyna. Phaser Phaser effect. The effect changes according to input level. Parameter Display Range Description Decay 6 to 46000 ms Decay speed Feedback gain (plus values for normal-phase feedback, minus values for FB. Gain –99 to +99% reverse-phase feedback) Direction Up, Down Upward or downward frequency change Sense...
  • Page 11: Delay Lcr

    Mod. Delay Basic repeat delay with modulation. Parameter Display Range Description Wave WAVE Sine, Triangle Modulation waveform Delay TIME 0.0 to 2725.0 ms Delay time Feedback gain (plus values for normal-phase feedback, minus values for FB. Gain –99 to +99% reverse-phase feedback) Freq.
  • Page 12 8 Band Parallel Delay 8-band modulation delay connected in parallel. Parameter Display Range Description Selects the modulation waveform used for “other” in the Wave Parame- Wave Form W.F. Triangle, Saw Up, Saw Down ter below. Effect Level ELVL 0.0 to 10.0 Effect level Direct Level DLVL...
  • Page 13 4 Band 2 Tap Mod. Delay 4-band delay connected in parallel w/2 multi-tap modulation delays. Parameter Display Range Description Selects the modulation waveform used for “other” in the Wave Parame- Wave Form W.F. Triangle, Saw Up, Saw Down ter below. Effect Level ELVL 0.0 to 10.0...
  • Page 14 8 Multi Tap Mod. Delay 8 Multi tap modulation delay. Parameter Display Range Description Selects the modulation waveform used for “other” in the Wave Parame- Wave Form W.F. Triangle, Saw Up, Saw Down ter below. Effect Level ELVL 0.0 to 10.0 Effect level Direct Level DLVL...
  • Page 15 Short + Medium + Long Mod. Delay 3 band multi tap delay w/3 delay times. Parameter Display Range Description Selects the modulation waveform used for “other” in the Wave Parame- Wave Form W.F. Triangle, Saw Up, Saw Down ter below. Effect Level ELVL 0.0 to 10.0...
  • Page 16: Early Ref

    Early Ref. Early reflections. Parameter Display Range Description Small Hall, Large Hall, Random, Type TYPE Type of early reflection simulation Reverse, Plate, Spring Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins FB. Gain –99 to +99% Feedback gain Room Size SIZE...
  • Page 17: Spring Reverb

    Spring Reverb Spring reverb simulation. Parameter Display Range Description Reverb 0.0 to 10.0 Reverb level HQ. Pitch High-quality pitch shifter. Parameter Display Range Description Mode MODE 1 to 10 Pitch shift precision Delay 0.0 to 1000.0 ms Delay time Feedback gain (plus values for normal-phase feedback, minus values for FB.
  • Page 18 Multi Filter 3-band multi-filter (24 dB/octave). Parameter Display Range Description Low Pass Filter, High Pass Filter, Type 1 TYP1 Filter 1 type: high pass, low pass, band pass Band Pass Filter Freq. 1 FRQ1 28.0 Hz to 16.0 kHz Filter 1 frequency Level 1 LVL1 0 to 100...
  • Page 19 Reverb+Flange Reverb and flanger effects in parallel. Parameter Display Range Description Wave WAVE Sine, Triangle Modulation waveform Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins Freq. FREQ 0.05 to 40.00 Hz Modulation speed Mod. Delay 0.0 to 500.0 ms Modulation delay time Feedback gain (plus values for normal-phase feedback, minus values for FB.
  • Page 20 Reverb->Symphonic Reverb and symphonic effects in series. Parameter Display Range Description Wave WAVE Sine, Triangle Modulation waveform Initial Delay IDLY 0.0 to 500.0 ms Initial delay before reverb begins Freq. FREQ 0.05 to 40.00 Hz Modulation speed Mod. Delay 0.0 to 500.0 ms Modulation delay time Reverb Time 0.3 to 99.0 s...
  • Page 21: Delay+reverb

    Delay->Early Ref. Delay and early reflections effects in series. Parameter Display Range Description Delay L DT.L 0.0 to 1000.0 ms Left channel delay time Delay R DT.R 0.0 to 1000.0 ms Right channel delay time FB. Delay DTFB 0.0 to 1000.0 ms Feedback delay time Feedback gain (plus values for normal-phase feedback, minus values for FB.
  • Page 22 Distortion->Delay Distortion and delay effects in series. Mainly used for direct connection to guitar amp’s front input. Parameter Display Range Description Distortion1, Distortion2, Type TYPE Overdrive1, Overdrive2, Distortion type Crunch Delay 0.0 to 2725.0 ms Delay time Feedback gain (plus values for normal-phase feedback, minus values for FB.
  • Page 23 Presence 0.0 to 10.0 Adjusts level of extremely high frequencies Off, American 412, British 412, Modern 412, YAMAHA 412, Hybrid 412, American 212, British 212, When using a line connection to connect directly to a mixer, this can be Speaker...
  • Page 24 Presence 0.0 to 10.0 Adjusts level of extremely high frequencies Off, American 412, British 412, Modern 412, YAMAHA 412, Hybrid 412, American 212, British 212, When using a line connection to connect directly to a mixer, this can be Speaker...
  • Page 25 Presence 0.0 to 10.0 Adjusts level of extremely high frequencies Off, American 412, British 412, Modern 412, YAMAHA 412, Hybrid 412, American 212, British 212, When using a line connection to connect directly to a mixer, this can be Speaker...
  • Page 26 Presence 0.0 to 10.0 Adjusts level of extremely high frequencies Off, American 412, British 412, Modern 412, YAMAHA 412, Hybrid 412, American 212, British 212, When using a line connection to connect directly to a mixer, this can be Speaker...
  • Page 27 Distortion Multi (Chorus) Multi effect consisting of Comp + Distortion + Chorus + Delay + Reverb. Mainly used for direct connection to guitar amp’s front input. Parameter Display Range Description Lead1, Lead2, Drive1, Drive2, Crunch1, Crunch2, Fuzz1, Type TYPE Fuzz2, Distortion1, Distortion2, Distortion type Overdrive1, Overdrive2, Tube, Solidstate, Bypass...
  • Page 28 Distortion Multi (Flange) Multi effect consisting of Comp + Distortion + Flange+ Delay + Reverb. Mainly used for direct connection to guitar amp’s front input. Parameter Display Range Description Lead1, Lead2, Drive1, Drive2, Crunch1, Crunch2, Fuzz1, Type TYPE Fuzz2, Distortion1, Distortion2, Distortion type Overdrive1, Overdrive2, Tube, Solidstate, Bypass...
  • Page 29 Distortion Multi (Tremolo) Multi effect consisting of Comp + Distortion + Tremolo + Delay + Reverb. Mainly used for direct connection to guitar amp’s front input. Parameter Display Range Description Lead1, Lead2, Drive1, Drive2, Crunch1, Crunch2, Fuzz1, Type TYPE Fuzz2, Distortion1, Distortion2, Distortion type Overdrive1, Overdrive2, Tube, Solidstate, Bypass...
  • Page 30 Distortion Multi (Phaser) Multi effect consisting of Comp + Distortion + Phaser + Delay + Reverb. Mainly used for direct connection to guitar amp’s front input. Parameter Display Range Description Lead1, Lead2, Drive1, Drive2, Crunch1, Crunch2, Fuzz1, Type TYPE Fuzz2, Distortion1, Distortion2, Distortion type Overdrive1, Overdrive2, Tube, Solidstate, Bypass...
  • Page 31 Acoustic Multi Multi effect for electric-acoustic guitar. Parameter Display Range Description Condenser1, Condenser2, Dynamic1, Dynamic2, Tube1, Mic Type TYPE Microphone simulator type Tube2, Nylon String1, Nylon String2 Blend BLND 0.0 to 10.0 Balance between mic simulator and direct sounds Bass BASS -12.0 to 12.0 dB Low frequency level...

Comments to this Manuals

Symbols: 0
Latest comments:
  • Edvaldo ferraz Sep 29, 2016 11:37:
    Precisava deste manual em portugues
  • Kenneth Borrett Mar 04, 2016 06:38:
    Dear Sir/Madam
    ​I have a Yamaha Magic Stompbox model MK2
    And want to transfer some patches across via my PC.
    I have the Original cd and usb cable. If you could advise step by step how to transfer these patches I would be very grateful.