Advertisement
EXAMPLE SETUP B
(MCS2 + CP80M
+ TX7 + RX21)
Here we will explain how to use the MCS2 to control a tone generator and rhythm machine. The CP80M
sends Note On/Off and Sustain On/Off messages. These are received at the MCS2 MIDI IN 2 and sent
out from MCS2 MIDI OUT along with the messages the MCS2 itself produces. The Note On/Off messages
from the CP will play the TX7, and we can add additional controiler messages from the MCS2. To make
things even more interesting, we will connect
a RX21 Rhythm Programmer and control it with Tempo and
Start
/ Stop messages from the MCS2. Connect everything as shown in the above diagram. (Be sure to
connect TX7 MIDI THRU to RX21
MIDI IN.)
INITIAL SETTING
USER SETTING
CONTROLLER
ASSIGNMENT
MIDI MESSAGE
ASSIGNMENT
MIDI MESSAGE
Portamento
-
Poly / Mono
PRE17
Continue
Program Dec
Portamento
Portamento Time
Portamento Time
Foot Controller
|
-
=
MIDI CH
1
MIDI Channel 1
~18-
Advertisement
