Table of Contents
Advertisement
2 2 2 2
Check the VoIP Only Mode box.
3 3 3 3
Click Save Changes, Write Settings to Flash and Reboot,
and Confirm.
Note:
After you set the V3 for VoIP Only Mode, you do not need to
dial # before dialing a number.
Connection Troubleshooting Tips
If you are having trouble connecting to the Internet, we
recommend you first determine whether your V3 is using a WAN
IP address. Then, depending on the answer, determine which of
the tips below best fits your situation.
To determine whether your unit is using a WAN IP address, open
the System Status page (click the System Status icon on top of
any page in the Zoom Configuration Manager) and click the
WAN Status button. If you have a WAN IP address, it will appear
on this page. (If you forgot how to log in to the Zoom
Configuration Manager, see page 7.)
•
If you have a WAN IP address, skip to page 15.
•
If you don't have a WAN IP address AND you are
—a Cable Modem User or
—a DSL PPPoA or 1483 Modem User
perform a Release/Renew operation as described below.
1 1 1 1
Go to the V3's Advanced Setup page and click WAN
DHCP Status.
2 2 2 2
Select Release and click Save Changes.
3 3 3 3
Select Renew and click Save Changes.
4 4 4 4
Go to your Web browser (i.e., Internet Explorer or
Netscape Navigator) and try to connect to a familiar Web
address. If you are unsuccessful, check to see if you have a
14
Advertisement
Table of Contents
