Related Manuals for Advantech LPPC-3211SW
Summary of Contents for Advantech LPPC-3211SW
- Page 1 User Manual LPPC-3211SW/3181SW Intel® Core™ i processor based Panel PC with 18.5"/21.5" Color TFT LCD Display...
- Page 2 No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.
- Page 3 (ESD) or electromagnetic interference (EMI) leakage, we strongly recommend using CE-compliant industrial enclosure products. Technical Support and Assistance Visit the Advantech website at http://support.advantech.com to obtain the latest product information. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information to hand before calling: –...
- Page 4 In compliance with IEC 704-1:1982 specifications, the sound pressure level at the operator’s position does not exceed 70 dB (A). DISCLAIMER: These instructions are provided according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
- Page 5 Safety Precaution - Static Electricity Follow the simple precautions below to protect yourself from harm and the products from damage. To avoid electrical shock, always disconnect the power from the PC chassis before manual handling. Do not touch any components on the CPU card or other cards while the equipment is powered on.
- Page 6 Revision Date Version Description/Change July 2018 Initial PPC-3211SW/3181SW User Manual...
-
Page 7: Table Of Contents
Contents Chapter General Information ......1 Introduction ....................2 Key Features..................... 2 Front Panel....................2 Figure 1.1 PPC-3211SW/3181SW front panel ......2 Rear Panel ....................3 Figure 1.2 PPC-3211SW/3181SW rear panel ......3 Panel Underside..................3 Figure 1.3 Resistive touch panel underside......... 3 Dimensions .................... - Page 8 2.3.3 Arm Mounting ................21 Figure 2.29Arm mount for panel PC........... 21 2.3.4 Stand Mounting................22 Figure 2.30VESA mount screw holes......... 22 Figure 2.31Securing the VESA mount base....... 23 Figure 2.32Securing the VESA mount bracket......23 Figure 2.33Securing the stand mount hinge cover..... 24 Figure 2.34Completed stand mount ...........
-
Page 9: Chapter 1 General Information
Chapter General Information This chapter provides general information regarding PPC- 3211SW/3181SW. Introduction Specifications Dimensions... -
Page 10: Introduction
Introduction Advantech's PPC-3181SW/3211SW is an all-in-one light panel PC with a wide format 18.5" / 21.5" full HD LCD. Powered by an Intel® 6th Gen Core™ i processor, PPC- 3181SW/3211SW provides good performance and optimal memory, graphics and peripheral I/O support in a compact, fanless, embedded system. With a high durabil- ity design, PPC-3181SW/3211SW adopts a flat touch screen with IP65 front panel protection, die-cast AI alloy in an aesthetic enclosure. -
Page 11: Rear Panel
Rear Panel The PPC-3211SW/3181SW rear panel features four VESA mount (100 x 100 mm) holes located below figure 1.2. Figure 1.2 PPC-3211SW/3181SW rear panel Panel Underside The system I/O located at the panel underside (Figures 1.3) are listed below. 1 x Power input connector ... -
Page 12: Dimensions
Dimensions 558.40 Figure 1.4 PPC-3211SW dimensions 477.7 Figure 1.5 PPC-3181SW dimensions PPC-3211SW/3181SW User Manual... -
Page 13: Specifications
Specifications PPC-3211SW PPC-3181SW LCD Display 21.5" 18.5" Display Type TFT LCD TFT LCD Resolution Max. 1920 x 1080 1366 x 768 Brightness Color 16.7M 16.7M Pixel Pitch 476.64(H) x 268.11(V) 300(H) x 300(V) Viewing Angle 160, 140 170, 160 Contrast 5000 1000 Backlight... -
Page 14: Ordering Information
Note! The test conditions for the power consumption values provided above were as follows: Memory: 16G DDR4 2400 HDD: 64G SSD OS: Windows 7 (64bit) Software: Burn In Test 8.1 Ordering Information Part Number Description Image PPC-3211SW-P65A Panel PC with Intel® 6th Core i proces- PPC-3181SW-P65A Power adapter 100 ~ 240 V , 90 W,... -
Page 15: Chapter 2 System Installation And Setup
Chapter System Installation and Setup Quick System Tour Memory Card Installation HDD Installation mSATA Installation Wireless LAN Card Installation Mounting the System... -
Page 16: Quick System Tour
Quick System Tour Before setting up the panel PC, take a moment to identify the locations of the device controls, drives, connectors, and ports (as shown in Figure 2.3). When placed upright, the PPC-3211SW/3181SW front panel should appear as shown in Figure 2.1. -
Page 17: Installation Procedures
Figure 2.3 Panel PC underside with I/O A. 2 x LAN B. 1 x HDMI C. 2 x USB 3.0 D. 2 x USB 2.0 E. COM2: RS-232/422/485 F. COM1: RS-232 G. DC-In H. Power Button Installation Procedures When installing system hardware, adhere to the following order: Install the memory card Install SATA HDD or mSATA storage devices Install peripheral devices... - Page 18 Insert the memory card into the corresponding slot on the main board (see the area marked in red in Figure 2.5). Then place the memory thermal pad provided in the accessory box on top of the memory card (Figure 2.6). Figure 2.5 Memory card installation Figure 2.6 Thermal pad placed on the memory card Warning! Ensure that the thermal pad (provided in the accessory box) is placed...
-
Page 19: Hdd Installation
2.2.2 HDD Installation Remove the four retention screws on the HDD bracket (Figures 2.7 and 2.8). Figure 2.7 Retention screws on HDD bracket Figure 2.8 HDD module bracket Connect the SATA cable provided in the accessory box to the SATA HDD mod- ule (Figure 2.9). - Page 20 Using the four screws provided in the accessory box, affix the SATA HDD mod- ule to the HDD bracket (Figure 2.10). Figure 2.10 Secure SATA HDD with screws Affix the SATA HDD bracket to the main board. Tie the SATA power cable in place and then plug the cable into the corresponding connector on the mother- board (Figure 2.11).
-
Page 21: Msata Installation
2.2.3 mSATA Installation Insert the mSATA card into the socket. Secure the card in place using two screws provided in the accessory box (Figure 2.12). Figure 2.12 mSATA module installation 2.2.4 Wireless LAN Card Installation 2.2.4.1 Full-Size Mini PCIe Installation Insert the full-size mini PCIe card into the socket. - Page 22 2.2.4.2 Half-Size Mini PCIe Installation Retrieve the hexagonal screw provided in the accessory box. Align the screw with the notch on the PCB and secure in place (Figure 2.14). Figure 2.14 Hexagonal screw location Insert the half-size mini PCIe card into the socket at a 45-degree angle. Secure the card in place using a screw provided in the accessory box.
- Page 23 Connect the antenna cables. Fix the cables on the brackets while noting the cable routing (Figures 2.16). Figure 2.16 Full-size mini PCIe LAN antenna cables Remove the two plugs located at the top of the rear cover (Figure 2.17). Figure 2.17 Removing plugs for the antennae Install the external antennae (Figure 2.18).
-
Page 24: Mounting The System
Mounting the System Warning! When mounting the panel PC, more than one person should perform the installation to prevent accidental damage to the panel or personal injury. Le comité constate qu’el-nasr “ mounting, Plus d’une personne installa- tion to prevent the cadre accidental damage to the personal injury. The panel PC supports various mounting options, as listed below. - Page 25 Insert four M4 screws into the holes on the panel PC and tighten them to secure the bracket to the rear panel. Figure 2.20 Screw locations on the rear panel Warning! Ensure that the thread depth of the screws on the rear panel does not exceed 4 mm.
-
Page 26: Panel Mounting
Secure the panel PC in place by tightening screws in the wall mount bracket (Figure 2.22). Figure 2.22 Securing the panel PC 2.3.2 Panel Mounting To mount the flat bezel panel PC into a panel, follow the steps below. Cut out a panel corresponding to the size shown in Figures 2.23 and 2.24. (unit: mm). - Page 27 Figure 2.24 PPC-3181SW cut out dimensions Install the panel PC in the cabinet and retrieve eight hook brackets from the accessory box (Figure 2.25). Figure 2.25 Hook brackets for panel mounting PPC-3211SW/3181SW User Manual...
- Page 28 Insert the hook brackets into the holes following the direction of the arrows shown in Figure 2.26 and hang the panel PC. Figure 2.26 Hook brackets location Tighten the screws to affix the panel PC in place (Figure 2.27). Figure 2.27 Fasten the hook bracket Figure 2.28 Panel mount rear view PPC-3211SW/3181SW User Manual...
-
Page 29: Arm Mounting
2.3.3 Arm Mounting PPC-3211SW/3181SW can be mounted on a VESA-compliant arm mount with a 100 mm interface pad. To affix the panel PC to an arm mount, follow the steps below. Refer to the installation instruction of the mounting arm to correctly mount the arm onto the surface as a base. -
Page 30: Stand Mounting
2.3.4 Stand Mounting Before stand mounting, check that the product was shipped with the following items: To mount the panel PC onto the stand, follow the steps below Use four M4 x 8L screws to affix the VESA bracket to the panel PC. Users can choose between a 75 x 75 mm or 100 x 100 mm VESA mount according to their requirements. - Page 31 Use the four M4 x 8L screws to secure the base plate to the mount stand (Figure 2.35). Figure 2.31 Securing the VESA mount base Use four M4 x 6L screws to secure the mount stand to the VESA mount bracket. Figure 2.32 Securing the VESA mount bracket PPC-3211SW/3181SW User Manual...
- Page 32 Use one M4 x 5L screw to secure the stand mount hinge cover. Figure 2.33 Securing the stand mount hinge cover Figure 2.34 Completed stand mount PPC-3211SW/3181SW User Manual...
-
Page 33: Jumper Settings
Chapter Jumper Settings Motherboard Layout Jumpers and Connectors External COM Ports and Pin Definitions... -
Page 34: Motherboard Layout
Motherboard Layout A diagram of the motherboard layout showing the locations of the internal peripheral connectors is provided below (Figure 3.1). The internal peripheral connectors are accessible when the motherboard is outside of the chassis. Figure 3.1 Motherboard layout diagram PPC-3211SW/3181SW User Manual... -
Page 35: Internal Jumpers And Connectors
Internal Jumpers and Connectors The internal jumpers and connectors on the motherboard, and their pinouts, are listed in the table below. Connectors Function Type CN44 LVDS backlight connector Wafer 8P 1.25 mm LVDS connector Wafer 20 x 2P 1.25 mm SATA power connector Wafer 5P 2.5 mm SATA... -
Page 36: Lvds Enable Power Select Jumper
3.2.3 LVDS Enable Power Select Jumper Icon LVDS Enable Power Select Jumper (1-2) (2-3) 3.3V Default* 3.2.4 RTC Select Icon RTC Select (1-2) Normal Default* (2-3) Clear CMOS 3.2.5 COM1 Pin 9 Power Select CN42 Icon COM1 Pin 9 Power Select (1-2) COM1 RI Default*... -
Page 37: Atx/At Select
3.2.6 ATX/AT Select Icon ATX/AT Select (1-2) (2-3) Default* External COM Ports and Pin Definitions Figure 3.2 Location of COM1 and COM2 ports COM1: RS-232 COM1 Pin 9 is set as “RI” by default. This setting can be changed to 5 V or 12 V out- put using a jumper. - Page 38 COM1 COM2 RS-232 RS-232 RS-422 RS-485 DATA- DATA+ Ring or 5V/12V output RING PPC-3211SW/3181SW User Manual...
-
Page 39: Software Setup
Chapter Software Setup Driver Installation BIOS Setup Program... -
Page 40: Driver Installation
Driver Installation Before installing software on the panel PC, install the corresponding drivers to ensure full functionality. All drivers can be downloaded from the Advantech website http://www.advantech.com BIOS Setup Program 4.2.1 Entering BIOS Setup After powering on the system, press the <Del> button to access the BIOS Setup screen. -
Page 41: Adjustment Of Lcd Brightness
4.2.2 Adjustment of LCD Brightness Select System Agent (SA) Configuration option in the Chipset tab. Select Graphics Configuration option in the Chipset tab. PPC-3211SW/3181SW User Manual... - Page 42 Select LCD Control option to choose between six brightness levels. Select Brightness Mode Control and select SIO. PPC-3211SW/3181SW User Manual...
- Page 43 Select Brightness Control to choose between five brightness levels. Brightness is controlled through Power Options in Windows OS. PPC-3211SW/3181SW User Manual...
-
Page 44: Com2 Mode Selection (Rs232/Rs422/Rs485)
4.2.3 COM2 Mode Selection (RS232/RS422/RS485) Select NCT5523D Super IO Configuration in the Advanced tab. Select Serial Port 2 Configuration option. PPC-3211SW/3181SW User Manual... - Page 45 Select Serial Port 2 Mode option to set the COM2 operation mode as RS232, RS422, or RS485. If COM2 mode is set as RS485, the RS485 Auto Flow control option can be Enabled or Disabled. PPC-3211SW/3181SW User Manual...
-
Page 46: Bios At And Atx Setup
If COM2 mode is set as RS485, the Serial Port2 Terminal option can be Enabled or Disabled. 4.2.4 BIOS AT and ATX Setup Select PCH-IO Configuration option in the Chipset tab. PPC-3211SW/3181SW User Manual... -
Page 47: Wake-On-Lan
Select Restore AC Power Loss and set the Power On option to AT and the Power Off option to ATX. 4.2.5 Wake-on-LAN Select PCH-IO Configuration option in the Chipset tab. PPC-3211SW/3181SW User Manual... - Page 48 Set the Wake On By PCIE Wake(I211/Ring) option to Enabled for LAN2 & COM Ring. 3. Set the Wake on By LAN1(219LM) option to Enabled. PPC-3211SW/3181SW User Manual...
-
Page 49: Sata Mode Selection
4.2.6 SATA Mode Selection Select SATA Configuration option in the Advanced tab. Select SATA Mode Selection to adjust the settings. PPC-3211SW/3181SW User Manual... -
Page 50: Boot Options
4.2.7 Boot Options Select CSM Configuration option in the Advanced tab. Select Boot Option Filter to adjust the settings. PPC-3211SW/3181SW User Manual... -
Page 51: Bsmi Rohs
Appendix BSMI RoHS... -
Page 52: Bsmi Rohs
BSMI RoHS 設備名稱：電腦 型號 （型式） ：PPC-3211SW/3181SW Equipment name Type designation (Type) 限用物質及其化學符號 Restricted substances and its chemical symbols 多溴聯苯 六價鉻 多溴二苯醚 單元 Unit Polybromina 鎘 Hexavalent Polybrominate 鉛 Lead 汞 Mercury Cadmium chromium d diphenyl (Pb) (Hg) (Cd) biphenyls ethers (PBDE) (PBB) 液晶面板... -
Page 53: Appendix B China Rohs
Appendix China RoHS... -
Page 54: China Rohs
China RoHS Thank you for choosing an Advantech product. In compliance with the China RoHS standard SJ/T11364, “Marking for the Restriction of the Use of Hazardous Sub- stances in Electrical and Electronic Products”, all hazardous substances present in the product are disclosed below. -
Page 55: Watchdog Timer Programming
Appendix Watchdog Timer Programming Example... -
Page 56: Watchdog Timer Programming Example
Watchdog Timer Programming Example The watchdog timer is provided to ensure that standalone systems can always recover from catastrophic CPU failures and crashes. Such events may have been caused by external EMI or a software bug. If the CPU is malfunctioning, the watch- dog timer performs a hardware reset to return the system to a previous state. - Page 57 ;----------------------------------------------------------------------------- ;Set WDT timeout value ;----------------------------------------------------------------------------- MOV DX, 2EH MOV AL, F1H OUT DX, AL MOV DX, 2FH MOV AL, 05H OUT DX, AL; set timeout value as 5s; 00 = timeout disabled ;----------------------------------------------- ; Exit the Extended Function Mode ;---------------------------------------------- MOV DX, 2EH MOV AL, AAH...
- Page 58 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2018...