Page 3
Macey 3-in-1 Highchair IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: FOLLOW THE MANUFACTURER’S INSTRUCTIONS. DO NOT LEAVE CHILDREN UNATTENDED. THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED - MOST INJURIES FROM HIGH CHAIRS ARE CAUSED BY FALLS.
Page 4
Macey 3-in-1 Highchair Chair seat x 1 Tray Washer Leg cover x 4 Chair holder x 1 Transparent tray x 1 Upper leg (A/B/C/D) x 4 Down leg (A/B/C/D) Driver x 1 Footrest Screw For quicker assembly,we recommend the use of a power drill on a low-speed setting.
Page 5
Macey 3-in-1 Highchair 1. Install the 4 pcs of legs by joining the upper legs and down legs 2. Insert 4 pcs of legs in chair holder by 4 screws+ 4 washers. according to the same marks (A+A, B+B, C+C, D+D).
Page 6
Macey 3-in-1 Highchair 3. Insert footrest in 4 pcs of legs by 4 screws+ 4 washers. Instructions: Make sure that four legs all standing on the floor, and then tighten 4 screws on the top of the legs and 4 screws on the footrest. It can avoid unstable during the assembling.
Page 7
Macey 3-in-1 Highchair ay a 5. Make sure the both sides buttons of transparent 6. Take off tray: Press 1 button in one side to take out the tr tray has locked after putting on the chair tray. little. Repeat in the other side.
Page 8
Macey 3-in-1 Highchair Different use for baby at different age High chair changes to high chair without tray : Pressing 2 buttons and take off the high chair without High chair tray. tray BABY HIGH CHAIR BABY HIGH CHAIR 6 months -3 years 4 -6 years...
Page 9
Macey 3-in-1 Highchair Safety Harness Use CLEANING & CAR E ● DO NOT USE THE PRODUCT UNLESS ALL COMPONENTS ARE CORRECTLY FITTED AND ADJUSTED.REGULARLY INSPECT THE HIGHCHAIR FOR MAINTENANCE OF LOOSE SCREWS ETC. ● DO NOT USE THE HIGHCHAIR IF ANY PART IS BROKEN, TORN OR MISSING.
Need help?
Do you have a question about the Macey 3-in-1 Highchair and is the answer not in the manual?
Questions and answers