Supermicro X13DGU User Manual page 149

Client Certification Configuration
This feature allows you to configure the client certificate to be used by the server.
Enroll Certification

This feature allows you to enroll the certificate in the system.
Enroll Certification Using File

This feature allows you to enroll the security certificate in the system by using a file.
Certification GUID
Press <Enter> and input the certification GUID.
Commit Changes and Exit

Use this feature to save all changes and exit TLS settings.
Discard Changes and Exit

Use this feature to discard all changes and exit TLS settings.
Delete Certification
This feature is used to delete the certificate if a certificate has been enrolled in the system.
Intel(R) VROC SATA Controller
Note 1: This section is based on your system configurations and related device(s)
installed.
Note 2: This section is available when "SATA Mode Selection" is set to RAID.
Note 3: Refer to PCH SATA0 Configuration, PCH SATA1 Configuration, and PCH
SATA2 Configuration submenus in the BIOS Setup main menu to set "SATA Mode
Selection".
The following information is displayed.
•
Intel VROC SATA driver version
149
Chapter 4: UEFI BIOS