Supermicro X13DGU User Manual page 16

Super X13DGU User's Manual
Motherboard Features
CPU
•
Supports dual 4th/5th Gen Intel Xeon Scalable Processors (Socket E LGA 4677) with four UPIs (20GT/s max.) and a
thermal design power (TDP) of up to 350W
•
Max Series (HBM) SKUs are supported.
Memory
•
Supports up to 8TB 3DS RDIMM/RDIMM DDR5 (288-pin) ECC memory with speeds up to 5600MT/s or 4400MT/s in 32
DIMM configuration (Note below).
Note : Memory speed and capacity support depends on the processors used in the system.
DIMM Size
•
Up to 256GB at P12V
Note: For the latest CPU/memory updates, please refer to our website at
motherboards.
Chipset
•
Intel PCH C741
Expansion Slots
•
Four PCIe 5.0 x16 connectors for GPUs
•
Five PCIe 5.0 x8 NVMe via GenZ 4C/MCIO connectors
•
Two NVMe PCIe 5.0 / SATA3 Hybrid M.2 ports (with M-Key 2280 support)
•
Sixteen PCIe 5.0 x8 via GenZ 4C+/MCIO connectors for riser cards
•
Two SlimSAS LP (MCIO) connector with support of eight SATA 3.0 connections (RAID 0, RAID 1, RAID 5, and RAID 10
supported)
•
One SlimSAS LP (MCIO) connector with support of four SSATA 3.0 connections (RAID 0, RAID 1, RAID 5, and RAID 10
supported)
Baseboard Management Controller (BMC)/Network
•
ASPEED AST2600 BMC
•
One dedicated BMC LAN/VGA (via AST2600 BMC HW RoT)
Graphics
•
Graphics controller and VGA support via ASPEED AST2600 BMC
I/O Devices
•
VGA Port
•
Serial (COM) Port
•
SATA 3.0
Peripheral Devices
•
One USB 2.0 header on the motherboard
•
Two USB 3.2 Gen1 (5Gbps) ports on front panel
BIOS
•
AMI SPI BIOS
•
EFI GUI, SPI dual/quad speed control, riser card auto detection support, RTC (Real Time Clock) wakeup, IPMIView,
SMCIPMITOOL, IPMI CFG, Redundant power supply unit detection, SPM, SUM-OOB/InBand
Motherboard Features
•
One front-accessible VGA port (JVGA1)
•
One front-accessible serial port (JCOM1)
•
Three SATA 3.0 ports (JS1/JS2/JS3)
16
https://www.supermicro.com/en/products/