Table of Contents
Advertisement
The generator uses a system of air-cooling, and it is
necessary to clean its components regularly, including the
grilles, the cover of the fan and the fan itself so as to ensure
cooling.
Keep the fuel filter clean, and change the oil of the motor
regularly.
Periodically check the installation of the connections and
the tightness of the fixations, re-tightening them if necessary.
Clean the components of the air filter periodically, and
replace the air filter when necessary.
Remove any electrical equipment that is plugged in before
starting or stopping the generator.
Before transporting the generator, you must empty the fuel
tank.
Maintenance and repair of the generator must be carried
out by a qualified technician from an authorised after-sales
service centre.
Warning: when you start the generator with the cord, watch out for
sudden changes in the rotation of the motor!!! Risk of wounding!!! Never
cover the generator when it is running. The cut-out mounted on the
generator has the aime of reducing the risk of electric shock. If it needs to be
replaced with another cut-out, the latter must correspond to the technical
specifications of the generator. Due to important mechanical constraints, it is
necessary to use a flexible sheathed cable with a strong rubber protective
layer (conforming to IEC 245-4) or a similar cable. If using an electrical
extension cable, the total length of the extension must not exceed 60m when
the section of the wire is 1.5mm
section of the wire is 2.5mm
and must not exceed 100m when the
2
.
2
04
Advertisement
Table of Contents
