Table of Contents
Advertisement
If the engine oil alerting light flashes for few seconds, it means the oil
capacity is insufficient. Refill the oil and restart the engine.
4.2 Overload Indicating Light(RED)
When the overload indicating light is on,
generator detects that the output of the phase-side
electrical equipment has been overloaded, causing
the converter to overheat or the AC voltage to rise. Then the AC
protector works and stops the generator to protect the generator and
the equipment which connects with it. The AC indicating light(GREEN)
is off, but overload indicating light (RED)is on,engine will not stop
working.
While the overload light is on, and the generator has no output, please
take following measures:
1. Turn off the connected electrical equipment and stop engine.
2. Reduce the total power rate of connected electrical equipment
within the rated output range.
3. Check whether the cool air inlet is blocked by foreign matters and
whether the relevant control parts are abnormal. If there is any problem,
remove it immediately.
4. Restart the engine after checking.
the
12
Advertisement
Table of Contents
