4-1-1.Operation Display Status Explanation - Xinje DS5E Series Manual

parameter number under the group.
Auxiliary function Fx-xx: The first X denotes the group number, and the last two X denotes the

parameter number under the group.
Alarm state E-xxx: The first two X denote the alarm category, and the last x denotes the small

category under the category.
Take modifing P3-09 as an example:
Step Display
1
2
3
4
5
6
7
8

4-1-1.Operation display status explanation

When powered on, the panel display is set according to P8-25 parameters (supported by 3770 version and
later).
Paramete
Name
r
P8-25 Panel
displa
Use buttons
Defaul
Suitabl
t
e mode
setting
0 All 0: normal display, power on
display 'BB' or 'run'
No operation
Press STA/ESC to enter parameter
setting
Press INC to increase by 1, press 3
times to add to 3, it shows P3-00
Press ENTER, the last "0" will
flash
Press INC to increase to 9
Long press ENTER to enter P3-09
Press INC, DEC, ENTER to
increase/decrease and shift bit,
after changing, long press ENTER
to confirm
END
Meaning
46
Operation
effectiv
Modify
e
Anytim Power
e on