4-2.Servo Parameters; 4-2-1.Px-Xx Parameters; 4-2-2.Ux-Xx Monitoring Parameters; 4-2-3.Fx-Xx Auxiliary Function Parameters - Xinje DS5E Series Manual

Digit data
P5-40
Rotate
detection /TGON
2. short code display content
Short code

4-2.Servo parameters

4-2-1.PX-XX parameters

See Appendix parameters for details.

4-2-2.UX-XX monitoring parameters

See Appendix parameters for details.

4-2-3.FX-XX auxiliary function parameters

F0-XX

Function code
F0-00
Near signal width: P5-06
When the motor speed is higher than the rotating speed, turn on the
lamp.
Rotation detection speed: P5-03 (unit: rpm)
Standby status
Servo OFF status. (The motor is in a non-electrified state)
In operation
Servo enabling state. (The motor is on-line)
Need reset status
Servo needs to be re-energized
Forbidden forward drive state
P-OT ON status. Refer to Section 5.2.4, "Overrun Prevention".
Forbidden reversal drive state
N-OT ON status. Refer to Section 5.2.4, "Overrun Prevention".
Control mode 2 is vacant.
Explanation
Alarm clear
49
Display contents
Display contents