Connect Communication Cables; Connect Proximity Cables - Graco 24D829 Instructions-Parts List Manual

Connect Communication Cables

1. Feed communication cable (83) through base cube
bulk head.
83
121
122
85
F . 11
IG
2. Connect communication cable (83) to adapter cable
(82) connected to the FCM.
FCM
F . 12
IG
3. Feed other end of communication cable (83)
through bulkhead at the bottom of the power distri-
bution box.
4. Connect communication cable (83) to one of the
open ports of the splitter.
83
F . 13
IG
3A0238G
82
83
splitter

Connect Proximity Cables

L-Head
1. Connect the applicator end of the proximity sensor
cable (418) to the dispense proximity sensor on the
L-Head.
2. Connect the applicator end of the proximity sensor
cable (419) to the cleanout proximity sensor on the
L-Head.
3. Connect the other end of the proximity sensor cable
(418) to the dispense proximity sensor cable (122),
labeled A1, on the AC power pack. See F
4. Connect the other end of the proximity sensor cable
(419) to the cleanout proximity sensor pigtail (85),
labeled 2C, on the AC power pack.
5. Connect the termination connector (425) to the con-
nector (121), labeled 5A. Feed the connector (425)
and cable (121) into the base cube and secure.
S-Head
1. Connect the S-Head proximity sensor patch cable
(426) to the connector (121), labeled 5A. See F
11.
2. Connect the applicator end of the proximity sensor
cable (418) to the proximity sensor on the applica-
tor.
3. Connect the other end of the proximity sensor cable
(418) to the S-Head proximity sensor patch cable
(426).
4. Feed the cables (122, 85), marked A1 and 2C, into
the base cube and secure.
Setup
. 11.
IG
.
IG
19