Paradyne 9161 Installation Instructions Manual page 6

Connecting to the DSX
1. Insert the DB15 end of the DSX
cable into the DSX interface.
2. Insert the other end of the cable
into the CPE (Customer Premises
Equipment, such as a PBX).
Connecting the COM Port to a User Interface
1. Insert the 8-pin end of the cable into the COM port.
2. Insert the other end of the cable into the user interface (VT100-compatible terminal
emulation) connector.
3. Press Return on the keyboard to display the Main Menu. If you need to configure
for other than a direct link, see the Technical Reference .
COM Port-to-Terminal/Printer
COM Port-to-PC Cable
Set the speed of the async (VT100-compatible) terminal so
*
it matches the NAM's factory-loaded data rate of 19.2 kbps,
character length set to 8, parity set to None, and stop bits
set to 1. The flow control should be set to None or
Hardware.
Cable or
COM
*
PBX
P O
R T
2
C O
M
496-15052-01
6
9 1
6 1
N E
T
D B
M
DSX
D S
X
P O
R T
1
496-15055