DFI CS650 User Manual page 57

MEBX Intel(R) ME General Settings
X X
Change ME Password
If you want to change ME password, select Change ME Password and then press Enter. A
prompt that requires password input will show up.
1. Enter the current password and then press Enter.
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.55.1521
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
INTEL(R) ME PLATFORM CONFIGURATION
Change ME Password
Local FW Update <Enabled>
Intel(R) ME Password
Intel(R) ME New Password
[↑↓] =Move Highlight [Enter] =Select Entry
2. Enter a new password and then press Enter. The password must include
- 8-32 characters;
- Strong 7-bit ASCII characters excluding : , and " characters;
- At least one digit character (0, 1, ...9);
- At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;);
- At least one lower case and one upper case characters.
3. Enter the new password again to verify the new password.
Verify password
User's Manual | CS650
[Esc] =Exit
MEBX Intel(R) ME General Settings
X X
Local FW Update
Select Local FW Update then press Enter. Select Enabled or Disabled or Password Protected
then press Enter.
Intel(R) Management Engine BIOS Extension v12.0.0.0010/Intel(R) ME v12.0.55.1521
Copyright(C) 2003-17 Intel Corporation. All Rights Reserved
INTEL(R) ME PLATFORM CONFIGURATION
Change ME Password
Local FW Update <Enabled>
Disabled
Enabled
Password Protected
[↑↓] =Move Highlight <Enter> =Complete Entry [Esc] =Discard Changes
Chapter 4
INTEL AMT SETTINGS
57