Peg Port Configuration - DFI CS650 User Manual

Chipset
X

PEG Port Configuration

Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
PEG Port Configuration
PCIE1 Not Present
Enable Root Port [Enabled]
Max Link Speed [Auto]
PCIE3 (Option) Not Present
Enable Root Port [Enabled]
Max Link Speed [Auto]
► PEG Port Feature Configuration
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Enable Root Port
Enable or disable the root port, or select "Auto" for auto-detection.
Max Link Speed
Configure PCIE1/PCIE3 port's Max Speed: Auto, Gen1, Gen2 or Gen3.
User's Manual | CS650
► PEG Port Feature Configuration
Enable or Disable the Root
PEG Port Feature Configuration
Port
Detect Non-Compliance Device
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Detect Non-Compliance Device
Enable or disable this field to detect non-compliance PCIe devices in the PEG.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
[Enabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Chapter 3
BIOS SETTINGS
Detect Non-Compliance PCI
Express Device in PEG
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
48