Installing The Mini Pcie Module - DFI CS650 User Manual

Internal I/O Connectors Expansion Slots
X X
Please follow the steps below to install the card into the socket.
User's Manual | CS650
Step 1:
Insert the card into the socket
at an angle while making sure
the notch and key are perfectly
aligned.
Step 2:
Press the end of the card far
from the socket down until
against the stand-off.
Step 3:
Screw tight the card onto the
stand-off with a screw driver
and a stand-off screw until
the gap between the card and
the stand-off closes up. The
card should be lying parallel to
the board when it's correctly
mounted.
Internal I/O Connectors Expansion Slots
X X

Installing the Mini PCIe Module

Before installing the Mini PCIe module into the Mini PCIe socket, please make sure that the fol-
lowing safety cautions are well-attended.
1. Make sure the PC and all other peripheral devices connected to it has been powered
down.
2. Disconnect all power cords and cables.
3. Locate the Mini PCIe socket on the system board
4. Make sure the notch on card is aligned to the key on the socket.
Mini PCIe Full Size
Notch
Chapter 2
HARDWARE INSTALLATION
Mini PCIe Socket
Stand-off
Key
33