Performax 240-3726 Operator's Manual page 25

• Run the saw for approximately ve to ten minutes to allow the brushes to "seat" themselves. If the brushes are not seated
correctly, the electric brake may not function correctly and could damage the motor. While the brushes are seating,
some sparking may be noticed in the motor. This is normal for new brushes.
STORAGE COMPARTMENT (Fig. 19)
The scroll saw has a storage compartment (A) that is located
under the left side of the work table. It can be used
for storage of small accessories, such as saw blades or hex
keys.
MAINTENANCE
FIG. 19
A
C
Page 24