Performax 240-3726 Operator's Manual page 19

INSTALLING THE MITER GAUGE (Fig. 9)
• Slide the rod (A) on the miter gauge (B) into the groove
(C) on the work table (D).
• Loosen the lock knob (E) to turn the miter gauge to the
desired angle.
DUST EXTRACTION PORT (Fig. 10)
• This scroll saw allows a hose or vacuum accessory
(not provided) to be connected to the dust-extraction port
(A) at the front of the saw.
• If excessive sawdust buildup occurs inside the base, use
a wet/dry vacuum cleaner or manually remove sawdust.
This will keep your saw cutting ef ciently.
ASSEMBLY
FIG. 9
E
D
FIG. 10
B
A
C
A
Page 18