Performax 240-3726 Operator's Manual page 22

SETTING THE WORK TABLE ANGLE
(FIG. 13)
• Loosen the bevel lock knob (A).
• Set the angle by tilting the work table (B).
• Fix the angle by tightening the bevel lock knob (A).
SETTING THE SAWING ANGLE (FIG. 14)
• Set the angle by loosening the lock knob (A) on miter
gauge (B). The angle can be read from the scale.
• Fix the angle by tightening the lock knob (A).
SCROLL CUTTING
WARNING:
To avoid possible serious injury from accidental starting, always turn the saw off, and unplug the saw
from power source before removing or replacing the blade.
For general type scroll cutting, follow the pattern lines by pushing and turning the workpiece at the same time. Do not try
to turn the workpiece while engaged in the blade without pushing it – the workpiece could bind or twist the blade.
WARNING:
To prevent serious personal injury, never leave the saw unattended until the blade has come to a
complete stop.
Page 21
OPERATION
FIG. 13
FIG. 14
B
A
B
A