Remote - Paradyne 1823 User Manual

1823 VoIP Gateway User's Guide
Parameter
Qvalue
Codec
DTMF
Packetization Period
Auth User Name
Auth Password
The Register button allows the user to manually make the gateway register with the remote proxy server.
The Modify button changes the phone parameters. The following is the figure after clicking Modify.
If the Register button is not clicked on after modification of the phone information, the gateway will
automatically register with the remote proxy until the expiration of the timeout (120 seconds by default). It
is recommended that you click on the Register button after any modification.

6.1.3 Remote

The Remote tab configures the buddy list. The gateway looks up the buddy list for the dialed phone
number first. If the phone number is not listed, then the gateway inquiries with the SIP proxy. It is also
suitable for peer-to-peer calling without a SIP Registrar/proxy. Without a SIP Registrar/proxy, the host
phone port cannot call a user agent that is not in the buddy list.
36
Description
Enter a value between 0 and 1 for registering with the proxy (in case
the same username is registered from a different location). Decimals
are accepted, such as 0.3.
In general, a larger number has higher priority for the proxy to
connect the call. If the same Qvalue is used, the call connection is
up to the call policy of the proxy.
The preferred CODEC of this user. The default is PCMU first.
The DTMF method is inband.
The period of time that the voice packets are packetized. The value
always shows 20 milliseconds.
The authentication user name for the Registrar/proxy, which is
assigned by the service provider.
The authentication password for the Registrar/proxy, which is
assigned by the service provider.
May 2005 1823-A2-GB20-00