Dhcp-Lease - Paradyne 1823 User Manual

1823 VoIP Gateway User's Guide

5.3.3 DHCP-Lease

Under the DHCP-Lease tab, information regarding MAC Address mapping to Lease IP addresses is
displayed.
5.4 Ping
To access the Ping screen, click on the Ping button, which is located under the Advanced menu bar. This
screen performs the ping test.
A Ping test is used to verify the status of a network connection after the RIP or static route function is
enabled. Ping sends a request message to the host and waits for a return message. This function can
verify if the remote host is reachable. Ping can also measure the round-trip time to the remote host. To
access the Ping test screen, click on the Ping tab. Enter the Host Name or IP address of the remote
terminal and click on Submit to start the ping and display the results.
30 May 2005 1823-A2-GB20-00