Configure - Eaton NetDirector B064-008-01-IPG Manual

The Log Server
The Menu Bar
The Menu bar consists of four drop-down menus:

• Configure

• Events
• Options
• Help
Note: If the Menu Bar appears to be disabled, select one of the B064-Series KVM Switch units from the list window to enable it.
Configure
The Configure menu consists of three functions: Add, Edit and
Delete.
Add
Select the Add function when you need to add a new B064-
Series KVM Switch to the list of units that the Log Server
records events for.
Note: You must first add a B064-Series KVM Switch via the Add function
before the Log Server can start recording its events.
Descriptions of the fields in this dialog box are shown in the table below:
Field Description
Address This can either be the IP address of the B064-Series KVM Switch or its DNS name (if the network
administrator has assigned it a DNS name). This value must be entered into the ANMS tab of the OSD
Device Management Notebook to communicate with the Log Server. (See Advanced Network Management
Settings section for details.)
Port Key in the port number that was specified in the ANMS tab of the OSD Device Management Notebook. If
the port number differs between the B064-Series KVM Switch OSD and the Log Server, the two will not
be able to communicate with each other.
Description This field is provided so that you can enter in additional information that will help differentiate this B064-
Series KVM Switch from the rest of the devices the Log Server is recording information for.
Limit This specifies the number of days that an event is kept in the Log Server's database before it can be
deleted. To remove all events that have passed the expiration date set in this field, use the Maintenance
function in the Events menu.
Edit
Select the Edit function to modify the information pertaining to an existing B064-Series KVM Switch. To edit an existing B064-
Series KVM Switch, select it from the list and open the Edit function from the Configure drop-down menu. A dialog box will appear
showing the exact information that was entered for the B064-Series KVM Switch when it was added using the Add function. Edit
this information and click OK.
Delete
To delete a B064-Series KVM Switch, simply select it from the list and open the Delete function. A dialog box will appear which will
display the B064-Series KVM Switch information and ask you to click OK to delete it. If you want to remove it from the Log Server,
click OK.
74
When you open the Add function the following dialog box will
appear: