Changing The Super Administrator Login; Logging Into The B064-Series Kvm Switch; Local Console Login - Eaton NetDirector B064-008-01-IPG Manual

Table of Contents

Super Administrator Setup

Changing the Super Administrator Login

To change the default Super Administrator Username and

Password, do the following:

1. At the top of the OSD page, click User Management.

Since this is the first time the page is being accessed, only the

Super Administrator appears:

The B064-Series KVM Switches can be accessed in the following ways: via local console, an internet browser, the AP Windows

Client and/or the AP Java Client. Operating the KVM switch and configuring its settings is done the same regardless of how

you connect to the B064-Series KVM Switch; the only difference is the way in which you establish the connection. This chapter

describes the login procedures for each of these methods.

The local console login dialog box is displayed once the installation is complete. Simply key in your Username and Password and

click Login to bring up the OSD Main Page.

Note: If you supply an invalid login, the authentication routine will return an Invalid Username or Password message. If you see this message, log in

again being careful to enter the correct Username and Password.

2. Click Administrator in the left panel; or, select Administrator

in the central panel and click the Modify button at the

bottom of the page.

The User Information page appears:

3. Change the Username and Password to something unique.

4. Re-enter the password to confirm it is correct.

5. Click Save.

6. When the dialog box informing you that the change

completed successfully appears, click OK.

Table of Contents