Paradyne Hotwire 6371 Installation Instructions Manual page 9

2. Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the
cable into the jack labeled ETHERNET.
Use a straight-through cable and connect the other end to an Ethernet hub.
Do not connect to the optional Uplink connection with a straight-through cable
(requires an Ethernet crossover cable).
Ethernet
Hub
4
5
6
7
8
- or -
Use an Ethernet crossover cable and connect the other end to the Ethernet
Network Interface Card (NIC) installed in the PC.
PC with Ethernet
Network Interface
Card (NIC)
For the DSL router cable pin assignments, refer to Cables & Connectors on
page 14.
1
2
3
Ethernet
Straight-through
Cable
6371 RADSL Router
Ethernet
Line
Ethernet
Ethernet
Crossover
Cable
9
6371 RADSL Router
Line
00-16507-01
00-16506-01