Paradyne Hotwire 6371 Installation Instructions Manual page 16

The Ethernet interface connector uses an 8-pin, non-keyed modular plug.
Use shielded twisted-pair CAT5 or better cables.
— To connect to an Ethernet hub, use the straight-through connection.
8-Pin Straight-Through Connection
Pin # Function
1 10/100BaseT TX D+
2 10/100BaseT TX D–
3 10/100BaseT RX D+
4 & 5 Not used
6 10/100BaseT RX D–
7 & 8 Not used
- or -
— To connect directly to a PC with an Ethernet NIC card, use an Ethernet
crossover cable.
8-Pin Ethernet Crossover Cable
Function
10/100BaseT TX D+
10/100BaseT TX D–
10/100BaseT RX D+
Not Used
Not Used
10/100BaseT RX D–
Not Used
Not Used
Pin #1/2 = Orange/White
Twisted Pair
Pin # Pin #
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
Pin #3/6 = Blue/White
16
Ethernet
Cable
Pin #8
Function
10/100BaseT TX D+
10/100BaseT TX D–
10/100BaseT RX D+
Not Used
Not Used
10/100BaseT RX D–
Not Used
Not Used
99-16518
Twisted Pair
8-Pin
Plug
Pin #1
98-16055a