Paradyne Hotwire 6371 Installation Instructions Manual page 17

Optional Hotwire 6371 RADSL Router Wall Placement
The Hotwire 6371 RADSL Router is designed for tabletop placement. The DSL router
can also be mounted on a wall. To mount the DSL router, you will need:
Three slotted-head #6 self-threading screws with molly bolts
Drill and 3/16 drill bit for the molly bolts
Screwdriver
A template with the dimensions for the three screws is provided. See DSL Router
Hardware Template on page 18.
Procedure
To mount the DSL router:
1. Use a drill to install the plastic anchors (molly bolts).
2. Use a screwdriver to install the screws. Do not install the screws flush with the
wall. Leave enough clearance to hang the DSL router housing from the screws.
Wall
Fasteners
99-16170-02
17