Paradyne Hotwire 6371 Installation Instructions Manual page 10

Radsl router

Hide thumbs Also See for Hotwire 6371:

Table of Contents

3. The Console port acts as a DCE and uses an 8-pin straight-through cable for the

connection to a VT100 terminal or a PC running a terminal emulation program.

This is an optional connection used only for local configuration of the DSL router.

For details, refer to Local Console Access on page 14.

Connect the DB9 adapter to the PC and connect the cable to a PC or laptop. lnsert

one end of the straight-through cable into the jack labeled CONSOLE. Insert the

other end into the DB9 adapter for the serial port of the VT100 terminal or PC.

4. Insert the supplied power cord's round end into the jack labeled POWER. Plug the

transformer into an ac outlet.

Power

Jack

18 Vdc

800 MA

Transformer

The Hotwire 6371 RADSL Router hardware installation is now complete. When the

power cord is installed, the DSL router goes through a power-on self-test.

Console

Serial Line

VT100 Terminal

or PC

(9-pin Adapter)

6371 RADSL Router

00-16508-01

00-16505-01

Table of Contents