Table of Contents
Advertisement
10/100 Base-T — RJ45 port
Pin
Description
1
TXD+
2
TXD-
3
RXD+
—
4
—
5
6
RXD-
—
7
—
8
USB port
The communication interface is equipped with a master USB port, type "A" connector (H). This USB port will simplify the service
procedures for software updates or for taking backup files from the projector without network connection. An USB-stick is plugged
into the USB port and files can be transferred from or to the projector using the local or remote control unit. Note that the USB-stick
has to be Linux FAT16 compatible.
Card bus connector (PCMCIA)
This card bus connector (type II) allows you to connect your FLM projector with your LAN, using a wireless-LAN card supported by
Barco.
R59770017 FLM HD14 26/09/2006
5. Connections
39
Advertisement
Table of Contents
