Initial Settings; General Operation; Language; Picture - Zenith DVT723 Installation And Operating Manual

DVD Operation Setup (Continued)

Initial Settings

You can set your own Personal Preferences on the unit.

General Operation

Press SET UP.
1 1
The setup menu appears.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Press 3 3 /4 4 to select the desired item.
2 2
The screen will show the current setting for the
selected item, as well as alternate setting(s).
While the desired item is selected, press 2 2 , then
3 3
3 3 /4 4 to select the desired setting.
Press MEMORY/ENTER to confirm your selection.
4 4
Some items require additional steps.
Press SET UP, RETURN, or PLAY to exit the
5 5
setup menu.

Language

Disc Language
DVD
Select a language for the disc's Menu, Audio, and
Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 36. If you enter the wrong language
code, press CLEAR.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SET UP.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan

Picture

TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a conventional TV set is
connected. The video material formatted in the Pan &
Original Scan style is played back in that style (Both sides of the
English
picture are cut off).
French
16:9 Wide: Select when a 16:9 wide TV is connected.
German
Spanish
Italian
Chinese
Polish
Hungarian
Other — — — —
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the DVD
Player to a standard (analog) television, set Progressive
Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Original
English
French
German
Spanish
Italian
Chinese
Polish
Hungarian
Other — — — — Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
English
2) Press STOP and hold it for five seconds before
Spanish
French
DVD
4:3
Disc Audio
4:3
Disc Subtitle
16:9
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
DVD
Off
Disc Audio
On
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Caution
tray. See that "NO DISC" is displayed on the display
window.
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
Letterbox
Panscan
Wide
19