Reftek 130-SMHR-C User Manual page 76

Rev J
017:10:38:16 PQ
Indicates the parameters for calibration were received by the DAS.
017:10:38:17 PK
Indicates the parameters for Auto Center were received by the DAS.
017:10:38:16 PARAMETERS IMPLEMENTED
Indicates that all new parameters were received by the DAS and have been loaded accordingly. For example gain
relays for channels activated.
017:10:38:38 ACQUISITION ENABLED WITH DELAY OF 00:00
Indicates no delay of acquisition when ACQ start command was given. Operators can select a delay of up to 99
minutes and 99 seconds.
017:10:38:38 LINK PARAMETER PACKETS
Indicates the 130 CPU has pasted current parameter set into RAM for download with required data.
018:09:08:05 ACQUISITION STOP REQUESTED
Indicates the user requested acquisition to stop through an external user command.
018:09:08:05 ACQUISITION STOPPED
Reports the DAS has successfully stopped ACQ after instruction or due to data memory being full.
66
REF TEK 130-SMHR-C Users Guide
96480-00-UG
5/6/2021
Reftek Systems Inc.