Table of Contents
Advertisement
AUDIO MENU
AUDIO
MENU
-> BASS
-
I
TREBLE
-
I
BALANCE
L
I
AUDIO
STEREO
+
4-
R
AUDIO
MENU
-> BASS
-
I
+
TREBLE
-
I
+
BALANCE
L
I
R
Audio Menu
GENERAL
INFORMATION
Your TV is equipped to receive Multi-channel
Television
Sound (MTS) when available in your area. It can also
receive a Second Audio Program (SAP), that is, a program
broadcast
with two audio portions (two languages). The fol-
lowing modes of operation are available.
STEREO
Directs the sound to the left and right speakers as supplied
by the program source (broadcast
TV station, VCR, etc.)
MONO (Monaural)
Directs the same sound to both left and right speakers even
if the source being received is in stereo.
2ND AUDIO/SAP (Second Audio Program or SAP)
Directs the sound for the (SAP) Second Audio Program
(typically a second language) to both the left and right
speakers. SAP sound is always monaural.
Audio Menu For AUX Channel
NOTE: All adjustments on the AUDIO Menu are option-
al. You do not have to use these features in order to use
your TV.
Automatic Mode Selection
We recommend that you use the STEREO option. The TV
will switch automatically between the STEREO and
MONO modes dependent on the signal being received.
If you prefer SAP, use the 2ND AUDIO/SAP
option. On
those stations which broadcast two audio portions, you will
hear the SAP (usually a second language). When the SAP
broadcast ends, the TV switches automatically between
STEREO and MONO modes. The TV switches back to
2ND AUDIO/SAP
when the SAP broadcast
resumes.
NOTE: The AUDIO mode selection option is not available
while the AUX channel is being used.
BASS
Use ADJUST
(ADJ) Left/Right to adjust the amount of
BASS (low-frequency
level) in the sound. To decrease (-)
BASS, press ADJUST
(ADJ) Left. To ;_ncrease ( + ) BASS,
press ADJUST
(ADJ) Right.
TREBLE
Use ADJUST
(ADJ) Left/Right to adjust the amount of
TREBLE
(high-frequency
level) in the sound. To decrease
(-)
TREBLE,
press ADJUST
(ADJ) Left. To increase
(+) TREBLE,
press ADJUST
(ADJ) Right.
BALANCE
Use ADJUST
(ADJ) Left/Right to shift the BALANCE of
sound between the left and right speakers as indicated by
the on-screen display. To increase the relative sound level
in the Left (L) speaker, press ADJUST
(ADJ)
Left. To in-
crease the relative sound level in the Right (R) speaker,
press ADJUST
(ADJ) Right.
AUDIO
Use ADJUST (ADJ) Le_Right
to select the audio desired.
You may choose either STEREO,
MONO or 2ND AUDIO/
SAP. If current mode selection is not being received, the
status display shows NOT AVAILABLE.
If STEREO is
selected but not received, the following line appears at the
bottom of the menu:
THIS PROGRAM
IS NOT IN STEREO
If 2ND AUDIO/SAP
is selected but not received the follow-
ing line appears at the bottom of the menu:
THIS PROGRAM
HAS NO 2ND AUDIO
In either of these cases, the Channel/Time
display will al-
ways show what type of AUDIO
signal is being heard
(chosen or selected by default.)
(See next page for additional information.)
2s89-o
8 -- 1
Advertisement
Table of Contents
