Table of Contents
Advertisement
Auto Program (Channel Search)
Use Auto Program to specify over-the-air Antenna or Cable
Service incoming signal source and automatically store all of
the channels found by the channel search in non-volatile
memory
1
With the optional LP702 Installer's remote control in hand,
press POWER to turn on the Entertainment Machine.
2
Press MENU repeatedly until the Setup menu appears.
3
Using SELECT on the remote control, highlight Auto
Program on the screen.
4
Press the Right or Left arrow to go to the Auto Program
menu.
5
Using SELECT, choose either Cable TV or Off-Air Antenna on
your screen.
6
Press the Right or Left arrow to begin the Channel Search.
7
Press ENTER when the channel search is complete.
Auto Program finds channels being received by the TV tuner.
Cable will not work unless you subscribe to a cable service.
Once the channel search is complete, use the features on the fol-
lowing pages to: Add/delete channels, Include channel labels, so
that they appear on the channel/time/audio display. Choose from
the preset label selections or make custom labels. Use your own
names to more easily identify the station/network providing the
program.
Mini glossary
OFF-AIR-ANTENNA
If only over-the-air channels are available, select Off-Air-Antenna.
CABLE
If you subscribe to a cable service, select Cable.
P A G E 1 8
SETUP MENU
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
LANGUAGE
1
1
2
4
5
7
8
0
2
TIMER
MENU
SELECT
3/5
ADJ
4/6
TO PROGRAM
3
6
9
ENTER
7
ALARM
CH PREVIEW
ADJ
206-3686
Advertisement
Table of Contents
