Table of Contents
Advertisement
Step 4:
Assembly of the Pads
1.
Attach the back pad (11) to the back pad frame (8) with two M10*30 bolts (22) and two
Ø11*Ø20*2 flat washers (26).
2.
Attach the seat pad (12) to the main frame (2) with two M10*80 bolts (20) and two Ø11*Ø20*2
flat washers (26).
3.
Attach foam assembly (13) and two big collars (18) to the foam frame (10) with one M10*25
screw (24) and one Ø60 cap (15).
4.
Tighten the bolts and screws with the appropriate tools.
5.
Check that all bolts, screws and nuts are properly tightened and retighten if needed.
→
The assembly is completed.
16
Seated Leg Extension
Advertisement
Table of Contents
