Related Manuals for Taurus Dual Pro Pec Fly & Rear Delt
Summary of Contents for Taurus Dual Pro Pec Fly & Rear Delt
- Page 1 Assembly and Operating Instructions max. 180 kg ~ 180 Min. 236 kg L 137 | W 150 | H 195 SESS7132.01.01 SKU: SESS7132 Taurus Dual Pro Pec Fly & Rear Delt...
- Page 2 Pec Fly & Rear Delt...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly STORAGE AND TRANSPORT General Instructions TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Maintenance and Inspection Calendar DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing... - Page 4 Pec Fly & Rear Delt...
- Page 5 With Taurus® fitness equipment, the focus is on what sport is all about: maximum performance! Therefore, the equipment is developed in close consultation with athletes and sports scientists.
- Page 6 ABOUT THIS MANUAL Please carefully read the entire manual before installation and first use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance.
-
Page 7: General Information
GENERAL INFORMATION Technical Data Weight and Dimensions Packaging dimensions (L x W x H) and article weight (gross, incl. packaging): Box 1: 163 cm x 91 cm x 19.5 cm 25 kg / 55 lbs Box 2: 152 cm x 89 cm x 28.5 cm 35 kg / 77 lbs Box 3: 188 cm x 112 cm x 26.5 cm... -
Page 8: Personal Safety
Personal Safety ⚠ DANGER Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly affected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. -
Page 9: Set-Up Place
Set-Up Place ⚠ WARNING Do not place the equipment in main corridors or escape routes. CAUTION ⚠ Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. The training room should be well ventilated during training and not be exposed to any draughts. -
Page 10: Assembly
ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries. - Page 11 Number Name Quantity Frame Pulley set ( 114) Φ Pulley set ( Φ Pulley baffle Left shield + rear 005 + 008 + middle trim + right shield Left shield + front 005 + 009 + middle trim + right shield Side shield Tray Connecting strip...
- Page 12 10lb weight stack plate Cable set 1 Cable set 2 Left arm Right arm 37-1 Joint frame 35-2 Left cam frame 36-2 Right cam frame Upper frame 34-2 Left handle frame Right handle frame Main frame 33-2 Pulley cage Chest pad Head cushion Pec Fly &...
-
Page 13: Assembly
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fit properly. Tighten the screws using the tool only when you are instructed to do so. Step 1: Assembly of the Frame NOTICE... - Page 14 Step 2: Assembly of the Main Frame Fix the main frame (33-2) to the frame (001) with four screws (027), four spring washers (033-1) and four flat washers (032). Name Specification Qty. Frame Hex socket countersunk head screw M12*30 Φ24*Φ13*2.5 Flat washer 033-1 Spring washer...
- Page 15 Step 3: Assembly of the Upper Frame Fix the upper frame (34-2) to the main frame (33-2) with three screws (87), three spring washers (89) and three flat washers (93). Name Specification Qty. 33-2 Main frame 34-2 Upper frame M12*30 Hex socket head cap screw Spring washer Flat washer...
- Page 16 Step 4: Assembly of the Cam Frames and Joint Frame Place the right cam frame (36-2) and one joint frame (37-2) between the lower and upper part of the upper frame (34-2). Slide through one axle (46) and secure with two circlips for shaft (72). Repeat the procedure with the left cam arm (35-2).
- Page 17 Step 5: Assembly of the Arms Insert the right arm (39) into the joint frame (37-2) and secure with one axle (46) and two circlips for shaft (72). Repeat the procedure with the left arm (38). Name Specification Qty. 37-2 Joint frame Left arm Right arm...
- Page 18 Step 6: Assembly of the Seat Adjusting Bracket, Pulleys and Cable Routing NOTICE The majority of the pulleys are pre-assembled when delivered. These pulleys (69 and 85) need to be disassembled in order to perform the cable routing. The two pulleys (012 and 013) for the frame are not pre-assembled. Insert the seat adjusting bracket (40) into the main frame (33-2) and secure with one limiting screw (54) and one spring washer (80).
- Page 19 034-1 36-2 35-2 034-1...
- Page 20 Step 7: Assembly of the Cushions Fix the head cushion (82) to the upper frame (34-2) with two screws (84), two spring washers (88) and two flat washers (91). Fix the chest pad (81) to the main frame (33-2) with two screws (84), two spring washers (88) and two flat washers (91).
- Page 22 Step 8: Assembly of the Weight Plates and Labels NOTICE The guide rods are pre-assembled to the frame. Disassemble the upper part of the guide rods (002) by removing the screws (021), the guide rod fixing sleeves (003), the split washers (028) and the bumpers (014). Carefully slide each of the weight stack plates (67) over the guide rods (002) one by one.
- Page 24 Step 9: Assembly of the Shields and Trims NOTICE The left and right shields are pre-assembled with a front or rear middle trim. Make sure to align the shields in the respective direction (front/rear). Fix the left and right shields (005 & 006) with the rear and front middle trim (008 & 009) to the frame (001) with four screws (022).
- Page 26 Step 10: Assembly of the Handle Frames Fix the left handle frame (41) to the side shield (007) with two screws (78), two spring washers (80) and two flat washers (92). Fix the left handle frame (41) to the main frame (33-2) with two screws (76), two spring washers (80) and two flat washers (92).
- Page 27 33-2...
-
Page 28: Storage And Transport
STORAGE AND TRANSPORT General Instructions ⚠ WARNING The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ࣑... -
Page 29: Troubleshooting, Care And Maintenance
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. CAUTION ⚠ Damaged or worn components may affect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. -
Page 30: Maintenance And Inspection Calendar
Maintenance and Inspection Calendar To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specified intervals: Part Weekly Monthly Cables Screw connections Pulleys and cable routing Slide rails/Guide rods... -
Page 31: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. This could be a floor mat, for example, which makes your fitness equipment stand more securely and also protects the floor from falling sweat, but it could also be additional handrails on some treadmills or silicone spray to keep moving parts in good shape. -
Page 32: Ordering Spare Parts
The serial number of your equipment is unique. It's located on a white sticker. The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate field. Serial number: Brand / Category: Taurus / multi gym Model Name: Dual Pro Pec Fly & Rear Delt SKU: SESS7132... -
Page 33: Parts List
Parts List Name Specification Qty. Frame Guide rod Guide rod fixing sleeve Pulley baffle Left Shield Right Shield Side Shield Rear middle Trim Front middle Trim Connecting strip Pulley set φ89*25.8 Pulley set φ114*32 Bumper φ38*φ21*10 Floor mat Bumper φ62*φ20*26 Guide rod upper cap Hook stop collar Single Side glue cushion... - Page 34 033-1 Spring washer 034-1 Nylon nut 035-1 036-1 Stopple Φ10*Φ5.3*1 037-1 Elastic cylindri cal pin φ10*45 33-2 Main frame 34-2 Upper frame 35-2 Left cam frame 36-2 Right cam frame 37-2 Joint frame Left arm Right arm Seat adjusting bracket Left handle frame Right handle frame Pulley cage...
- Page 35 Cable set 1 Cable set 2 10lb weight stack plate 10lb counterweight Wide pulley Φ116*47 Steps rolling bearing Φ52*Φ25*18 Split washer Circlips for shaft d0=25 Cross recessed countersunk head screw M5*10 Hex socket head cap screw M6*30 Hex socket head cap screw M10*30 Hex socket head cap screw M10*65...
-
Page 36: Exploded Drawing
Exploded Drawing Pec Fly & Rear Delt... -
Page 38: Warranty
WARRANTY Training equipment from Taurus® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. - Page 39 Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.
-
Page 40: Contact
CONTACT TECHNICAL SUPPORT TECHNICAL SUPPORT & SERVICE TECHNICAL SUPPORT & SERVICE �� �� �� +49 4621 4210-900 80 90 16 50 +33 (0) 172 770033 +49 4621 4210-945 +49 4621 4210-933 �� +49 4621 4210-698 �� �� info@fitshop.dk service-france@fitshop.fr �� technik@sport-tiedje.de ��... - Page 41 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA Sport-Tiedje is Europe’s largest specialist store www.sport-tiedje.co.uk for home fitness equipment with currently over www.sport-tiedje.de/blog 70 stores and one of the world’s most renowned online mail order companies for fitness equipment. Private customers order via the 25 www.facebook.com/SportTiedje web shops in the respective national language or have their desired equpiment assembled on...
- Page 42 Notes Pec Fly & Rear Delt...
- Page 44 Dual Pro Pec Fly & Rear Delt...