Table of Contents
Advertisement
Step 3:
Assembly of the Swing Frame and Foam Frame
1.
Attach the swing frame (5) to the support frame (4) with one shaft (14), two Ø62*Ø10.5*3 big
washers (17), two Ø62.5*5 circle rings (16), two Ø60 caps (14) and two M10*25 screws (24).
2.
Attach the foam frame (10) to the swing frame (5) with one M10*25 bolt (23), one Ø10 spring
washer (27) and one Ø11*Ø38*2 flat washer (25).
3.
Tighten the bolts and screws with the appropriate tools.
15
Advertisement
Table of Contents
