Step 1:
Assembly of the Main Frame Parts
NOTICE
L
Do not tighten bolts and nuts completely yet. Leave room for adjustments.
1.
Attach the main frame (2) and the support frame (4) to the front ground sticking pipe (1) with a
total of four M10*100 bolts (19), eight Ø11*Ø20*2 flat washers (26) and four M10 lock nuts (28).
2.
Attach the rear ground sticking frame (3) to the main frame (2) and the support frame (4) with a
total of four M10*100 bolts (19), eight Ø11*Ø20*2 flat washers (26) and four M10 lock nuts (28).
3.
Attach the cross connection frame (6) to the main frame (2) with two M10*70 bolts (21), four
Ø11*Ø20*2 flat washers (26) and two M10 lock nuts (28).
4.
Attach the cross connection frame (6) to the suppoert frame (4) with two M10*100 bolts (19),
four Ø11*Ø20*2 flat washers (26) and two M10 lock nuts (28).
5.
Tighten the bolts and nuts with the appropriate tools.
13