Omron E5GCCX2D6M000 Manual page 61

Optional Products (Order Separately)
Terminal Unit
Model
E5DC-SCT1S
Push-In Plus Terminal Unit
Model
E5DC-SCT1B
USB-Serial Conversion Cable
Model
E58-CIFQ2
Communications Conversion Cable
Model
E58-CIFQ2-E
Note: Always use this product together with the E58-CIFQ2.
This Cable is used to connect to the front-panel Setup Tool
port.
Current Transformers (CTs)
Hole diameter
5.8 mm E54-CT1
5.8 mm E54-CT1L*
12.0 mm E54-CT3
12.0 mm E54-CT3L*
* Lead wires are included with these CTs. If UL certification is
required, use these CTs.
Mounting Adapter
Model
Y92F-53 (2pcs)
Short Bars (for E5DC)
Model
Y92S-P11 (4 pcs)
CX-Thermo Support Software
Model
EST2-2C-MV4
Note: CX-Thermo version 4.6 or higher is required for the E5DC.
CX-Thermo version 4.69 or higher is required for the E5DC-B.
For the system requirements for the CX-Thermo, refer to
information on the EST2-2C-MV4 on the OMRON website
(www.ia.omron.com).
Model
End Plate
Model
PFP-M
Spacer
Model
PFP-S
DIN Tracks
Model
PFP-100N
PFP-50N
Unit Labels
Model
Y92S-L2
End Cover
Model
Y92F-54
Connector Cover (for E5DC-B)
Model
E53-COV26
E5DC/E5DC-B
61