5
Proper Riding Method
After acquiring the vehicle, inflate the tire till over 20
•
psi and then let the TPMS PC learn the initial value
automatically so that it may operate normally in the
future.
Re-do Code Learning after replacing parts.
•
Because the tire pressure detector is mounted on the
•
nozzle position, keep the tool-inserting position away
from the nozzle when replacing the tire.
Make sure the direction is correct when replacing a
•
part.
Tire Pressure values are for reference only.
•
Slackening of nut during parts installation will cause air
•
leakage.
If the tire pressure cannot be detected, it means the
•
tire pressure detector battery is running out of the
power. In this case, make a part replacement.
Caution
Change Pressure Unit
Turn KEYLESS Main Switch ON, the Model Symbol will
light up.
Push the Dashboard and noodoe Switch to "m" position and
press the UP button to change over to TPMS Mode.
Pressing "O" button on the Right Handlebar Switch to
change units in the sequence of [kgf/cm
kpa].
56
3
→ bar → psi →
2