Table of Contents
Advertisement
To prevent the battery voltage from becoming too low to
start the engine, if the motor is running slowly after
starting the engine, please send it to KYMCO dealer for
inspection.
Engine Stop Switch
: At this position ②, engine is stopped and cannot be
started; it requires switching back to "
Caution
" position
Control Functions of Mechanism
to start the engine.
: At this position ①, starting the engine is allowed.
During normal riding, put the Engine Stop Switch at
"
" position. In the event of emergency, such as fuel
cable jam or vehicle tumbling, turn the switch to "
position to force-stop the engine.
Please note! When travelling under high speeds, do not
shut off or turn on the engine switch arbitrarily, to avoid
dangers of collision or concerns to traffic safety due to
loss of speed.
37
Caution
4
3
"
Advertisement
Table of Contents
