Scooter at a safe location before using the 12V Power
Socket.
12V Power Socket can only be used with a running
•
engine.
To prevent power depletion of battery, do not
•
charge a product using the 12V Power Socket
without running the engine.
To prevent fuse from being blown, do not charge a
•
product with a load exceeding 25W; if overheat
occurs during charging, the system will cut off
power supply automatically.
After riding and before leaving the vehicle, make
•
sure the product is unplugged and the Protection
Cap is properly covered back.
If the power is disconnected, reduce the load, turn
•
off the main switch and then restart the power.
Do not attempt to alter the power to prevent
•
damaging the wiring system of the entire vehicle.
Warning
51
Proper Riding Method
5
3