Table of Contents
Advertisement
7
Simplified Maintenance and Repair
Applicable Temperature of Engine Oil
To avoid using poor quality oil, please go to a KYMCO
dealer for oil change.
Oil Change Method
1.Remove Oil Level Guide.
Remove Drain Bolt.
Drain all the oil. Warming up the engine before
changing oil facilitates oil draining.
2.Clean Oil Screen and re-install it. Tighten Drain Bolt
after wiping it clean.
Caution
3.Fill the fresh engine oil and the replenishing volume
shall be 2.6L each time (if the engine oil filter is
included, then the replenishing volume shall be 2.7L).
4.Fully tighten the Oil Level Guide.
5.After warming up the engine, stop engine and wait for
1 minute; then verify oil level with Oil Level Guide.
1. Drain Bolt
94
3
Advertisement
Table of Contents
