It is recommended to use KYMCO original 4-stroke
•
engine oil.
The following conditions may expedite oil deterioration.
An early oil change is advised.
Riding on pebbled roads often.
Riding short distances often.
Idling often.
Riding in the cold area.
When replenishing oil, make sure the oil level is not
•
exceeding the upper limit mark.
Do not mix-use oils of different brand, class or low
•
quality ones; they may cause engine faults.
Change oil while the engine is still hot; be careful not
•
to burn your skin.
Oil Filter Element Tightening Torque:
11 N-m (110 kgf-cm)
Engine oil discharge bolt tightening torque:
9 N-m (90 kgf-cm)
Magnet Screw Tightening Torque:
28 N-m (280 kgf-cm)
Caution
Simplified Maintenance and Repair
Precautions on Oil Change
Excessive and insufficient oil amount can both affect
•
engine performance.
Excessive Oil - Increased friction resistance of
•
moving parts in the engine, which lowers output
power and increases engine temperature, leading to
early deterioration of engine oil.
Insufficient Oil-Reduced oil supply to moving parts
•
in the engine, therefore results in worn parts, parts
ablation, etc.
Do not mix-use oils of different brand, class or low
•
quality ones; they may cause engine faults.
Kymco Emissary Engine Oil contains additives (e.g.
•
spirits, etc.) during the manufacturing process.
Arbitrarily mixing additives bought from the market
•
may deteriorate the oil, affect lubricating properties
and shorten the service life of engine.
95
7
3