KYMCO AK550 Premium E5 2023 Owner's Manual page 21

4
Control Functions of Mechanism
1. Mileage Information:
Km/Mile Unit Change-over: When in ODO Display In-
•
terface, Press-and-hold "O" button on Right
Handlebar Switch for 2s to switch-over between Km
and Mile display.
Pressing DOWN ( ﹀ )button on the Right Handlebar
•
Switch, ODO → TRIP A → TRIP B → OIL → Belt
ODO → Total running Mileage displayed in Km or
•
Mile.
TRIP A/TRIP B → Single trip mileage; Single trip
•
mileage can be zeroed by pressing and holding "O"
button for 2s.
OIL → Oil Service Mileage. After running 5,000km,
•
the "services" symbol on the right of Dashboard
lights up constantly, indicating an oil recheck is
required.
Belt → Belt Service Mileage. After running 20,000km,
•
the "services" symbol on the right side of the
Dashboard will light up constantly, indicating a CVT
belt replacement is required.
Oil Replacement indicator will only light up after
•
running 5000km, therefore it will not light up for the
first oil replacement at 1000km. However, a Zero
adjustment is still necessary after oil replacement at
1000km so that the indicator can act correctly for a
subsequent indication.
When the accumulated mileage reaches 5000 km,
•
the oil change indicator (service symbol) will light up.
Switch to OIL mode and reset the accumulated
mileage to 0. The oil change indicator (services
symbol) will turn off, and the mileage will begin
recounting from 0.
When the accumulated mileage reaches 20,000 km,
•
the belt change indicator (service symbol) will light up.
To reset, switch to Belt mode and reset the
accumulated mileage to 0. The belt change indicator
(service symbol) will turn off, and the mileage will
begin recounting from 0.
16
Caution
3