Table of Contents
Advertisement
2. Tachometer: Indicates engine speed in rpm; each scale
multiplied by 1000rpm.
3.
Tire Pressure Detection Indicator: After KEY ON,
this indicator lights up if tire pressure is too high or too
low. If tire pressure decreases rapidly, the indicator
flashes quickly; if tire pressure decreases slowly, the
indicator flashes slowly.
Change unit of tire pressure: When in Tire Pressure
•
Display Interface, click "O" button on Right
Handlebar Switch to switch-over units in the
sequence of "kg/cm2 → bar →14psi → kpa".
4. TCS indicator light will light up in amber color when
turn on the ignition switch. Once the vehicle speed
over 6 km/h, the indicator light will go off automatically.
The TCS keeps function at this time.
5.
Low beam: Pushing the switch to "
Beam.
6.
Cruise control: This function is the settings for
cruise control, please refer to "Settings for Cruise
Control".
cruise control.
7.
High beam: When this indicator lit, the headlight is
in the high beam position.
8.
Left blinker: Direction button for left turn, indicator
light will flash when turned on; press middle button to
turn off.
9. Instant fuel consumption display: The instantaneous
fuel consumption is calculated for display reference
according to the throttle openness. There are three
fuel consumption unit selections of km/L, L/100 km,
and MPG. They must be set on the right handlebar
switch. (When TRIP A is reset, the average fuel
consumption will also reset.)
When clicking UP ( ︿ ) button on the Right
•
Handlebar Switch, VOLT(Battery Voltage) → AVE
(Average Fuel Consumption) → (Instant Fuel
" for Low
Consumption) → TPS(Tire Pressure)
• VOLT → Indicates Battery Voltage
AVE → Average Fuel Consumption(AVE) mode,
•
indicates Average Fuel Consumption(km/L and
L/100km), (after returning TRIP to Zero, AVE will
17
Control Functions of Mechanism
Settings button: This is the settings button for
4
3
Advertisement
Table of Contents
